DX-100 Hall Effect Measurement System supplier, manufacturer,exporter in China
Product Catalog:

Hall Effect Measurement System

Product Detail:

DX-100 Hall Effect Measurement System

DX-50 Hall Effect Measurement System

Testable materials:

  1. Semiconductor materials: SiGe, SiC, InAs, InGaAs, InP, AlGaAs, HgCdTe and ferrite materials etc.
  2. Low impedance material: metal, transparent oxide, weak magnetic semiconductor materials, TMR material, ect.
  3. High impedance material: Semi-insulating GaAs, GaN, CdTe, etc.

Hall-effect system components:

This system is consisted of electromagnet, high-precision electromagnet power supply, high-precision constant current source, high-precision voltage meter, gauss meter, connecting cables, standard sample, sample mount and the system software. The system contains specially developed DX-320 constant current source, six semi-microvolt meter and complex switching relays for Hall measurements (Integrally assembled switch). These have greatly simplified the connection and operation of experimental. DX-320 can be used alone as a constant current source or micro-volt meter. The system can be used to measure the carrier concentration, mobility, resistivity, Hall coefficient, and other important parameters of semiconductor material. These parameters must be known in advance to understand the electrical properties of semiconductor materials, so Hall Effect measurement system is an essential tool to understand and study of semiconductor devices and electrical properties of semiconductor materials. The results can be calculated by the software automatically, at the same time, it will get Bulk Carrier Concentration, Sheet Carrier Concentration, Mobility, Resistivity, Hall Coefficient, Magneto resistance, I-V curve and I-R curve measurement parameters.


No. Item Model Descriptions
1 Electromagnet DXWD-100 Pole dia.: 100mm.
Magnetic field:
17000 Gauss at 10mm airgap
10000 Gauss at 25mm airgap
8000 Gauss at 30mm airgap
Uniformity area: 1% in 6x6mm at 10mm airgap
Weight: 110 kgs
2 High precision
DX-150 Accuracy: ± 0.30% of reading/Resolution: 0.01mT range :0-3T /probe Thickness: 1.0mm/Length 100mm /digital Rs-232 interface data reading software with CDX-800FT probe
3 High precision
Power supply
F2030 Digital constant current power supply 10A, 100V, 1000W, RS-232 interface can be CNC polar conversion, resolution: 1mA
4 Probe and
sample holder
  Non-magnetic aluminum bracket 5-70mm adjustable; sample holder fixture (on request)
5 System software   Adjusting the magnetic field can be digitized and current testing of various material parameters
6 Constant current
and electric meter
DX-320 Current output: 0.1nA-50mA, voltage test: 0.1uV-30V
7 Cryostat DXE-12 80K-500K
8 Temperature regulator DX-202 Control temp. range:(80k-720k)
9 Vacuum Pump K25  


Main technical indicators:

1) Magnetic field intensity: Greater than 14000 gauss at 20mm air gap
2) Electric current: 0.1mA~50mA(Expandable to 1A)
3) Measuring voltage: 0.1uV~30V
4) Offers a variety of standard test materials: GaAs, Si etc.
5) Magnetic field minimum resolution: 0.01mT
6) Magnetic field measuring range: 0~3T
7) Resistance Range: 10mΩ~1MΩ 
8) Carrier concentration: 103~1023cm-3
9) Mobility: 0.1~108cm2/volt*sec
10) Systematic measurement errors: <2%

▲ with Gauss meter or data acquisition board computer communications
▲ I-V curves and I-R curve measurements
▲ resistivity range :10-6 ~ 1011 Ohm * cm
▲ Resistance Range: 10 m Ohms ~ 1MOhms
▲ carrier concentration: 103 ~ 1022cm3
▲ mobility: 102 ~ 107 cm2/volt * sec
▲ Temperature regulation 0.1K
▲ Temperature Range: 80K-500K (optional)
▲ fully automated testing, a key processing