 |
Product Detail: |  |
Multipolar Magnetic Field Distribution Tester
- DX-2100R Multipolar Magnetic Field Distribution Tester
- DX-2100RB Multipolar Magnetic Field Distribution Tester
- DX-2100RC Multipolar Magnetic Field Distribution Tester
|
Product Detail: | |
DX-2100RB Multipolar Magnetic Field Distribution Tester
Introduction
DX-2100R multipolar magnetic field distribution tester is developed and designed by Xiamen Dexing Magnet Tech. Co., Limited, combining with the actual needs of magnet ring manufacturers and motor companies, after years of unremitting efforts. It is high-tech product, specially used for the measurement and analysis of multipolar magnet ring surface magnetic field distribution. For magnet ring manufacturers and related motor enterprises, it is an indispensable tool for designing magnet ring and quality inspection.
Features
1. High degree of automation, high stability and repeatability, curves and data could be preserved and called arbitrarily.
2. With the powerful analysis functions of suitable for the design work, friendly user interface, a key operation on a test bench for test and maintaining data.
3. The data and the curve is multi information output, contrast analysis between multi rings and standard magnet ring.
4. It has fast measurement speed and can be adjusted according to the requirement, the fastest speed is 10 seconds / time. It can be carried out fast on-line quality inspection and has the ultra difference alarm function.
System configuration:
Computer, printer, teslameter, measuring software and stepper motor rotating platform.
1. the system hardware:
1). The host: including a host system stepper motor drive and a Gaussmeter with four ranges.
2). Base station and a probe bracket: provide the test probe, could be adjusted at X axis direction, Y axis direction and Z axis direction, adjust resolution: 0.1mm.
3). The rotation and the control part: containing a motor and a motor control part, smooth rotation, no noise.
4). Clamping part: clamped magnet ring or a magnet ring with shaft fast and stability, in order to ensure the accuracy of test result.
5). The test probe: using high-precision Hall sensor sealed probe, ensures the reliability and authenticity of the forward signal.
6). Gaussmeter: reasonably adopted four ranges Gaussmeter with SCM design, connected to the host through RS232 interface.
2. the system software:
1). Support computer to do data analysis, processing, storage, to complete the functions and technology index.
2). Maximum extreme value, minimum extreme value, average extreme value, maximum angle, minimum angle, average angle, pole width, poles, pole area and error analysis, etc.
3). With function of XY coordinate, P poler coordinate, harmonic analysis, XYZ three-dimensional magnetic field diagrams and magnetic field contour line, etc.
Technical index:
1. The magnetic field testing range: 1000Gs, 2000Gs, 4000Gs and 8000Gs four ranges, magnetic field measurement accuracy: 1%, (with calibration magnet 1000Gs, precision: 0.5%), repeatability:0.3%.
2. Platform concentricity: better than 0.05mm.
3. Magnet ring testing surface: outer surface, inner surface and end face, measuring small diameter and high density multipolar magnet ring could choose ultra-thin probe.
4. Magnet ring test range: outer diameter 3mm ~ 60mm, inner diameter 10mm ~ 80mm;
end face > 2mm, height 5 mm ~ 80mm.
5. The probe sensitive area: 0.5mm x 0.5mm ( ultra-thin probe 0.25mm x 0.25mm );
working temperature: - 55℃ ~ 125℃.
6. The longitudinal and transverse measurement, test report can be printed and stored.
Note: when directly measuring magnet ring, users should equip with nonmagnetic mould to avoid that chuck influences magnetic poles.
Hysteresis Graph Test System
