 |
Product Catalog: |  |
Digital Two(Three) Dimensional Gauss / Tesla Meter
- DX-210 Digital Two Dimensional Gauss / Tesla Meter
- DX-360 Intelligent Digital Three Dimensional Gauss / Tesla Meter
|
Product Overview: | |
DX-210 Digital Two Dimensional Gauss / Tesla Meter
DX-210 Gauss / Tesla Meter Detail:
DC Measurement(DC):
DC display resolution： 5 ¾ (6 digital filter display)
| DX-1800 | *0-3mT | 0-30mT | 0-300mT | 0-3T |
| Resolution | 0.00001mT | 0.0001mT | 0.001mT | 0.01mT |
Marked * is the Automatic identification rangs of low magnetic field probe
DC Accuracy: ±0.15% of reading ±0.05% of range
DC Temperature Coefficient：±(0.03% ±1 count)/ ºC
Acquisition Speed: 20/s
AC Effective Values(AC) and Frequency Measurement
AC Display Resolution: 5 ¾ (6 digital filter display)
AC RMS Frequency Range: 20Hz-2500Hz
AC RMS Accuracy: ±2% of reading
AC RMS Frequency Response: 20Hz-2500Hz
Acquisition Speed: 20/s
Front Panel
Display: 800 x480 Pixel,7 inch full view color screen
Display Resolution: 5 ¾ (6 digital filter display)
Display Update Rate: 5 rdg /s
Display Units: Gauss(G), Tesla(T), Amps/m(A/m), Oster(Oe)
Unit Multiplier: m,k,M
Definitions of control keys: AC/DC Switch, Measurement Units, Range Switch, Data Storage, Up/Down/Left/Right Direction, Menu, Max/Min/Interface Lock, Zero Mode, ConfirmationButton, Relative Mode, Reset Mode
Keyboard: 12 membrane keys
Front Panel Features: Good Communication Ability, Intuitive Operation, Display Hints, Brightness Control, Panel Lock
Probe Specifications
Input Type: Single Hall Effect Two Dimensional Sensor
Probe Features: High linear digital Hall probe, Probe Auto Zero
Probe Compatibility: Standard probe or special probe
Connector: 15 pin D-type
Interface Features
RS - 232C interface function
Baudrate: 19600, 57600, 115200
Connector: 9 pin D-type, Terminal Configuration
Software Suppot: Standard interface definition
Analog output monitoring
Configuration: Real-time analog voltage output
Rang: ± 3 V voltage
Frequency Response: DC to 2500Hz
Accuracy: depending on probes
Minimum load resistance: 1 k （Short-Circuit Protection）
Connector: BNC
General Parameters
Chassis: Metal shielded
Environment Temperature: 15℃to 35℃rated accuracy; 5℃to 40℃accuracy reducing
Power Requirements: 220-240(+5 ％, -10 ％), 50 or 60Hz
Size: 320 mmWidth× 110mmheight× 287mm
Weight:4kg（7.8lbs）
Optional probes
*The length could be customized as requirements
*We can provide the probes with temperature sesors
* May get gilded outside
* Lead time is about 1-4 week
Model |
L(mm) apporx |
D(mm) |
A(mm) |
Active area (mm2) |
Frequency range |
Full Scale |
magnetic linearity(%rdg) |
operating temp range |
Zero field offset voltage(mv) |
Temp Coefficient (max) |
stem material |
2DXP801F |
10/25/50 |
4.5 |
1±0.1 |
0.15 |
DC-800HZ |
30KG |
±0.2%to 30kG |
-10°Ct0+75°C |
0.01to0.2 |
±0.03%/C° |
Brass |
2DXP802F |
10/25/50 |
3.5 |
1±0.1 |
015 |
DC-800HZ |
30KG |
±0.2%to 30kG |
-10°Ct0+75°C |
0.01to0.2 |
±0.03%/C° |
Brass |
2DXP803F |
10/25/50 |
2.0 |
1±0.1 |
0.15 |
DC-800HZ |
30KG |
±0.2%to 30kG |
-10°Ct0+75°C |
0.01to0.2 |
±0.03%/C°° |
Brass |
2DXP804F |
10/25/50 |
1.5 |
1±0.1 |
0.15 |
DC-800HZ |
30KG |
±0.2%to 30kG |
-10°Ct0+75°C |
0.01to0.2 |
±0.03%/C° |
Brass |
2DXP805F |
10/25/50 |
1.2 |
1±0.1 |
0.10 |
DC-800HZ |
30KG |
±0.2%to 30kG |
-10°Ct0+75°C |
0.01to0.2 |
±0.03%/C° |
Brass |
2DXP806F |
10/25/50 |
0.9 |
1±0.1 |
0.10 |
DC-800HZ |
30KG |
±0.2%to 30kG |
-10°Ct0+75°C |
0.01to0.2 |
±0.03%/C° |
Brass |
Transverse probes
*The length could be customized as requirements
*We can provide the probes with temperature sesors
* May get gilded outside
* Lead time is about 1-4 week
Model |
L(cm) approx |
T (mm) |
W (mm) |
A (mm) |
Active area (mm2) |
Frequency range |
Full Scale (Standard) |
magnetic linearity (%rdg) |
operating temp range |
Zero field offset voltage(mv) |
TemP Coefficient (max) |
stem material |
DCG801F |
4.5/7 |
0.78 |
2 |
1±0.1 |
0.15 |
DC-400Hz |
30KG |
±0.2% to30kG |
-10°Ct0+75°C |
0.01-0.2 |
±0.03%/C° |
Brass |
DXG802F |
4.5/7 |
0.62 |
1.5 |
1±0.1 |
0.15 |
DC-400HZ |
30KG |
±0.2% to30kG |
-10°Ct0+75°C |
0.01-0.2 |
±0.03%/C° |
Brass |
DXD801F |
4.5/7 |
0.50 |
1.68 |
1±0.1 |
0.15 |
DC-400HZ |
30KG |
±0.2% to30kG |
-10°Ct0+75°C |
0.01-0.2 |
±0.03%/C° |
Brass |
DXD802F |
4.5/7 |
0.35 |
0.7 |
0.5±0.1 |
0.15 |
DC-400HZ |
30KG |
±0.2% to30kG |
-10°Ct0+75°C |
0.01-0.2 |
±0.03%/C° |
Resin |
DXD803F |
4.5/7 |
0.2 |
07 |
0.5±0.1 |
0.10 |
DC-400HZ |
30KG |
±0.2% to30kG |
-10°Ct0+75°C |
0.01-0.2 |
±0.03%/C° |
Resin |
Axial probes
*The length could be customized as requirements
*We can provide the probes with temperature sesors
* May get gilded outside
* Lead time is about 1-4 week
Model |
L(mm) apporx |
D(mm) |
A(mm) |
Active area (mm2) |
Frequency range |
Full Scale |
magnetic linearity(%rdg) |
operating temp range |
Zero field offset voltage(mv) |
Temp Coefficient (max) |
stem material |
1DXP801F |
10/25/50 |
3.5 |
1±0.1 |
015 |
DC-800HZ |
30KG |
±0.2%to 30kG |
-10°Ct0+75°C |
0.01to0.2 |
±0.03%/C° |
Brass |
1DXP803F |
10/25/50 |
2.0 |
1±0.1 |
0.15 |
DC-800HZ |
30KG |
±0.2%to 30kG |
-10°Ct0+75°C |
0.01to0.2 |
±0.03%/C°° |
Brass |
1DXP803F |
10/25/50 |
1.5 |
1±0.1 |
0.15 |
DC-800HZ |
30KG |
±0.2%to 30kG |
-10°Ct0+75°C |
0.01to0.2 |
±0.03%/C° |
Brass |
1DXP804F |
10/25/50 |
1.2 |
1±0.1 |
0.10 |
DC-800HZ |
30KG |
±0.2%to 30kG |
-10°Ct0+75°C |
0.01to0.2 |
±0.03%/C° |
Brass |
1DXP805F |
10/25/50 |
0.9 |
1±0.1 |
0.10 |
DC-800HZ |
30KG |
±0.2%to 30kG |
-10°Ct0+75°C |
0.01to0.2 |
±0.03%/C° |
Brass |
Hysteresis Graph Test System
