gauss meter,Teslameter,Gaussmeter,Magnetometers,Portable gaussmeter,Gauss meter,Tesla meter logo
gauss meter,Teslameter,Gaussmeter,Magnetometers,Portable gaussmeter,Gauss meter,Tesla meter
Product Catalog:

Teslameter / Gaussmeter

Product Details:

DX-180 Intelligent Digital Gauss Meter / Tesla Meter

DX-180 Gauss/Telsa Meter Details:

DC Measurement(DC):

DC display resolution: 5 ¾ (6 digital filter display)  

DX-180 Range
*0-3mT
0-30mT
0-300mT
0-3T
*0-10T
Resolution
0.00001mT
0.0001mT
0.001mT
0.01mT
0.1mT

Marked * are the automatic identification rangs of low magnetic field probe and ultra-high magnetic field probe
DC Accuracy: ±0.05% of reading ±0.005% of range
DC Temperature Coefficient: ±(0.01% ±1 count)/ ºC
Acquisition Speed: 20 times/sec

AC Effective Values(AC) and Frequency Measurement
AC Resolution: 0.01mT
AC RMS Frequency Range: 2Hz-50kHz
AC RMS Accuracy: ±1% of reading ±0.3% of range
AC RMS Frequency Response: 20Hz-2500Hz
Acquisition Speed: 15 times/sec

Front Panel
Display: 320 x 240 pixel, 3.5 inch full view color screen
Display Resolution: 5 ¾ (6 bit digital filter display)
Display Update Rate: 5 rdg /sec
Display Units: Gauss(G), Tesla(T), Amps/m(A/m), Oster(Oe)
Unit Multiplier: m, k, M
Definitions of control keys: AC/DC Switch, Measurement Units, Range Switch, Data Storage, Up/Down/Left/Right Direction, Menu, Max/Min/Interface Lock, Zero Mode, Confirmation Button, Relative Mode, Reset Mode
Keyboard: 14 membrane keys
Front Panel Features: Good Communication Ability, Intuitive Operation, Display Hints, Brightness Control, Panel Lock, Graphic Display

Probe Specifications
Input Type: Single Hall Effect Sensor
Probe Features: High linear digital Hall probe, Probe Auto Zero, Temperature Compensation, Ultra-thin only 0.80mm     
Probe Compatibility: Standard probe or special probe  
Connector: 15 pin D-type

Interface Features   
RS - 232C interface function  
Baudrate: 19600, 57600, 115200
Connector: 9 pin D-type, Terminal configuration    
Software Support: Standard interface definition
Analog output monitoring
Configuration: Real-time analog voltage output                     
Rang: ± 3 V
Frequency Response: DC to 2500Hz
Accuracy: depending on probes
Minimum load resistance: 1 k （Short-Circuit Protection）
Connector: BNC

General Parameters
Chassis: Metal shielded
Environment Temperature: 15℃to 35℃rated accuracy; 5℃to 40℃accuracy reducing                                                                                                      
Power Requirements: 220-240V (+5％, -10％), 50 or 60Hz
Size: L287mm × H110mm × W320 mm
Weight: 4kg（7.8lbs）

Optional probe:

Transverse probes

*The length and shape of probes could be customized as requirements           
*We can provide the probes with temperature sensors       
* May get gilded outside     
* Lead time is about 1-4 week     

Model
L(cm) approx
T (mm) max
W (mm)
A (mm)
Active area (mm)
Frequency range
Full Scale (Standard)
Magnetic linearity(%rdg)
Operating temp range
Zero temp
coefficient
(max)
Temp coefficient
(max)
Stem material
HCDX800F
6/8/10
1.00
2.6
1±0.1
0.15
DC-30kHZ
100kG
±0.05%to30kG
-10°Cto+100°C
±0.08 G/ºC
±0.03%/C°
Brass
HCDX801F
6/8/10
0.80
2.2
1±0.1
0.15
DC-30kHZ
100kG
±0.05%to30kG
-10°Cto+100°C
±0.08 G/ºC
±0.03%/C°
Brass
HCDX802F
6/8/10
0.60
1.55
1±0.1
0.15
DC-30kHZ
100kG
±0.05%to30kG
-10°Cto+100°C
±0.08 G/ºC
±0.03%/C°
Brass
HMDX801F
6/8/10
0.50
1.7
1±0.1
0.15
DC-30kHZ
100kG
±0.05%to30kG
-10°Cto+100°C
±0.08 G/ºC
±0.03%/C°
Brass
HMDX802F
Flexible
6/8/10
0.35
1.2
0.5±0.1
0.15
DC-30kHZ
100kG
±0.2%to30kG
-10°Cto+100°C
±0.10 G/ºC
±0.03%/C°
Resin
HMDX803F
Flexible
6/8/10
0.25
0.7
0.5±0.1
0.10
DC-30kHZ
100kG
±0.5%to30kG
-10°Cto+100°C
±0.10 G/ºC
±0.03%/C°
Resin

The model in red color is standard probe.

Axial probes

*The length and shape of probes could be customized as requirements           
*We can provide the probes with temperature sensors       
* May get gilded outside     
* Lead time is about 1-4 week     

Model
L(cm) approx
D(mm)
max
A (mm)
Active area (mm)
Frequency range
Full Scale (Standard)
Magnetic linearity
(%rdg)
Operating temp range
Zero temp
coefficient
(max)
Temp coefficient
(max)
Stem material
1HADX800F
10/25/50
5.00
1±0.1
0.15
DC-30KHZ
300kG
±0.05%to30kG
-10°Cto+100°C
±0.08 G/ºC
±0.03%/C°
Brass
1HADX801F
10/25/50
3.00
1±0.1
0.15
DC-30KHZ
300kG
±0.05%to30kG
-10°Cto+100°C
±0.08 G/ºC
±0.03%/C°
Brass
1HADX802F
10/25/50
2.00
1±0.1
0.15
DC-30KHZ
300kG
±0.05%to30kG
-10°Cto+100°C
±0.08 G/ºC
±0.03%/C°
Brass
1HADX803F
10/25/50
1.50
1±0.1
0.15
DC-30KHZ
300kG
±0.05%to30kG
-10°Cto+100°C
±0.08 G/ºC
±0.03%/C°
Brass
1HADX804F
10/25/50
1.20
0.5±0.1
0.15
DC-30KHZ
300kG
±0.05%to30kG
-10°Cto+100°C
±0.08 G/ºC
±0.03%/C°
Brass
1HADX805F 10/25/50
10/25/50
0.90
0.5±0.1
0.10
DC-30KHZ
300kG
±0.5%to30kG
-10°Cto+100°C
±0.12 G/ºC
±0.03%/C°
Brass