Magnet Machine:3D measuring meter of the distribution of the magnetic fields,magnetic field meter logo
3D measuring meter of the distribution of the magnetic fields,magnetic field meter
Product Detail:

Loop demagnetizer

Introduction of Loop demagnetizer:

Loop demagnetizerCT series loop demagnetizers are durable devices based on prov- en technology. The magnetic parts are drawn slowly (~0.15 m/s) through the coil opening. The parts are demagnetized through removal along he coil axis. The bigger the coil, the greater the magnetic field limit. The material must completely pass outside this field.

These devices reliably demagnetize parts up to a thickness of 20 mm. When short parts are demagnetized, the penetration depth of the field is less than 10 mm. Hard magnetic materials are not demagnetized properly by these devices.

 

 

Characteristics of Loop demagnetizer:

1. Sturdy,forshopflooruse
2. Versatile
3. Particularly suitable for easily alloyed and oblong parts

Coilmodule CT1 CT2 CT3 CT4 CT5 CT6 CT7 CT8
Dimensions W x H x D [mm]1 450x290
x150		 560x320
x170		 560x440
x190		 700x390
x230		 700x540
x230		 700x590
x230		 850x740
x350		 1050x740
x350
Active opening W x D 150 x 100 mm 260 x 130 mm 250 x 250 mm 400 x 200 mm 400 x 350 mm 400 x 400 mm 550 x 550 mm 750 x 550 mm
Maximum field, peak 2 25 kA/m 29 kA/m 20 kA/m 26 kA/m 18 kA/m 17 kA/m 11 kA/m 9 kA/m
Magnetic field limit3 500 mm 780 mm 1000 mm 1200 mm 1500 mm 1600 mm 2200 mm 2600 mm
Duty cycle S1, 100 %, continuous operation S1, 100 %, continuous operation S1, 100 %, continuous operation S1, 100 %, continuous operation S1, 100 %, continuous operation S1, 100 %, continuous operation S1, 100 %, continuous operation S1, 100 %, continuous operation
Weight 41 kg 62 kg 84 kg 110 kg 120 kg 130 kg 190 kg 230 kg
Connection 230 VAC
50 / 60 Hz
4.5 A 		230 VAC
50 / 60 Hz
12 A 		230 VAC
50 / 60 Hz
15 A 		230 VAC
60 Hz
22 A 		230 VAC
50 / 60 Hz
30.5 A 		230 VAC
50 / 60 Hz
31 A 		230 VAC
50 / 60 Hz
30 A 		400 VAC
50 / 60 Hz
25 A
Protection class IP 54 54 54 54 54 54 54 54
Configuration threaded threaded threaded threaded threaded threaded threaded threaded
1. Approximate
2. Divide by 1,41 to obtain RMS value
3. Minimal distance for the removal of the part along the coil axis